Anonymous
Apr 25, 2026
Rating: 5/5
No more oil leaks
Switched from traditional oil bath bushings to these SF-1 composites. Clean operation and no dripping oil underneath the machinery.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material Composition | Steel Back + Bronze Mesh + PTFME Layer |
| Lubrication Type | Self-Lubricating (Oil-Free) |
| Inner Diameter Sizes | 22, 25, 28, 30, 32, 35 mm |
| Max Dynamic Load | 140 N/mm² |
| Max Static Load | 250 N/mm² |
| Max Sliding Speed | 2.5 m/s |
| Operating Temperature | -40°C to +110°C |
| Friction Coefficient | 0.03 - 0.20 |
| Surface Roughness | Ra 0.4 - 0.8 μm |
| Package Quantity | 10 Pieces per Pack |
Anonymous
Apr 25, 2026
Rating: 5/5
No more oil leaks
Switched from traditional oil bath bushings to these SF-1 composites. Clean operation and no dripping oil underneath the machinery.
Anonymous
Apr 06, 2026
Rating: 5/5
Durable under load
Running high speed no issues. We tested them under max dynamic load and they held up perfectly without overheating.
Anonymous
Apr 04, 2026
Rating: 5/5
Excellent for automation
Used these on a conveyor system upgrade. The self-lubricating feature saves us so much maintenance time. Fitment was precise.
Anonymous
Mar 22, 2026
Rating: 4/5
Good fitment
Quality is good but check tolerance charts before ordering. They are slightly tighter than standard bronze bushings.
Anonymous
Mar 17, 2026
Rating: 5/5
Great supplier
Fast delivery and genuine SF-1 material. Packaging protected the bushings well during shipping. Will order again.
Q: Do you offer bulk discounts for large orders?
A: Yes, please contact our sales team directly for quotes on quantities over 100 packs.
Q: Are these dimensions metric or imperial?
A: All dimensions provided are in metric millimeters. Please convert if your shaft is imperial.
Q: Is there a break-in period required?
A: Minimal break-in is needed, but we recommend running at low load initially for the first hour.
Q: Can these handle oscillating motion?
A: Yes, they are ideal for oscillating movements where full rotation is not possible.
Q: What housing fit do you recommend for installation?
A: H7 housing tolerance is standard for these bushings. Ensure a proper interference fit for stability.