Anonymous
Apr 12, 2026
Rating: 5/5
No maintenance needed
Installed 6 months ago in a conveyor system. Still running smoothly without any grease or oil. Very satisfied with the durability.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Material | iglidur WFM-0507 Plastic Composite |
| Inner Diameter | 16 mm |
| Outer Diameter | 18 mm |
| Length | 12 mm |
| Flange Diameter | 20 mm |
| Lubrication | Self-Lubricating (Maintenance-Free) |
| Max Pressure | 50 N/mm² |
| Operating Temperature | -50°C to +90°C |
| Shaft Tolerance | h9 recommended |
| Series | WFM Flanged |
Anonymous
Apr 12, 2026
Rating: 5/5
No maintenance needed
Installed 6 months ago in a conveyor system. Still running smoothly without any grease or oil. Very satisfied with the durability.
Anonymous
Apr 05, 2026
Rating: 5/5
Fast shipping
Product exactly as described. Arrived quickly and packaging was secure. Will order again for future machinery repairs.
Anonymous
Mar 07, 2026
Rating: 5/5
Great for robotics projects
Used this on a custom robotic arm joint. The self-lubricating feature saves so much time on maintenance. Fits perfectly on the 16mm shaft.
Anonymous
Feb 05, 2026
Rating: 5/5
Replaced metal successfully
Swapped out old steel bushings for these. Operation is much quieter and there is no risk of rust in our humid environment.
Anonymous
Jan 29, 2026
Rating: 4/5
Good but tight fit
Quality is excellent, but the inner diameter was a bit tight for my shaft. Needed slight polishing. Otherwise works well.
Q: Is grease or oil required for installation?
A: No, this bearing is self-lubricating and designed to run maintenance-free without additional lubrication.
Q: Is this resistant to water or damp environments?
A: Yes, the iglidur material is resistant to moisture and suitable for damp environments without corroding.
Q: Can this be press fitted into a housing?
A: Yes, standard press fit procedures apply. Ensure the housing tolerance is correct to avoid deformation.
Q: What shaft tolerance is recommended for this bushing?
A: We recommend a shaft tolerance of h9 for optimal performance and fit with this series.
Q: What is the maximum rotational speed supported?
A: Max speed depends on load and temperature. Please refer to the technical datasheet for specific speed diagrams.