Anonymous
Apr 02, 2026
Rating: 5/5
Reliable industrial component
Ordered the 25mm length version. Precision is good and shipping was secure. Will order again for other machines.
Description
Reviews
| Brand | - |
| Category | Industrial Small Parts / Bearings & Bushings |
| Origin | - |
| Base Material | Copper Alloy with Graphite Plugs |
| Inner Diameter | 22 mm |
| Outer Diameter | 32 mm |
| Length Options | 15, 20, 25, 30, 35 mm |
| Lubrication Type | Self-Lubricating (Oil-Free) |
| Hardness | HB 90-120 |
| Max Load Capacity | 50 N/mm² |
| Operating Temperature | -40°C to +200°C |
| Friction Coefficient | 0.08 - 0.15 |
| Application Scope | Hydraulic Equipment, Automotive, Machinery |
Anonymous
Apr 02, 2026
Rating: 5/5
Reliable industrial component
Ordered the 25mm length version. Precision is good and shipping was secure. Will order again for other machines.
Anonymous
Mar 24, 2026
Rating: 5/5
Perfect for hydraulic press
These bushings fit perfectly in our hydraulic press setup. No oil needed which keeps things clean. Very satisfied with the durability.
Anonymous
Feb 28, 2026
Rating: 5/5
Excellent self-lubricating performance
Running these in a high-duty cycle application. The graphite plugs are distributing well. No signs of wear after 3 months.
Anonymous
Feb 14, 2026
Rating: 4/5
Good quality, tight fit
Material feels solid. Had to ream the hole slightly for our specific shaft tolerance but otherwise works great.
Anonymous
Feb 02, 2026
Rating: 4/5
Solid value for money
Works as described. Took off one star because delivery took a bit longer than expected, but the product itself is top notch.
Q: Is the 22mm ID exact or does it have tolerance?
A: There is a standard H7 tolerance. Please refer to the technical datasheet for specific machining allowances.
Q: What is the recommended shaft hardness?
A: We recommend a shaft hardness of HRC 45 or higher for optimal wear resistance.
Q: Do you offer bulk pricing for over 100 units?
A: Yes, please contact our sales team directly for volume discount quotes on large orders.
Q: Can these handle rotational speed of 1000 RPM?
A: No, these are designed for low-speed oscillating or sliding movements, typically under 0.5 m/s sliding speed.
Q: Can these be used in submerged water applications?
A: While water-resistant, prolonged submersion may affect lubrication efficiency. Best for dry or occasional exposure.